This is part two of the series of articles by our new writer Alex. If you have any questions feel free to ask them in our FAQ!

2.1 The sequence options
Assign sequence 1 /track=on /CueZero=off= /cuezeroextract=off /releasefirststep=on /info=“text“
/track=on – here on/off is possible. This will set tracking to on or off.
/cuezero=off – here on/off/dimmersonly/all is possible. This will set the option „CueZero“ to
on/off/Dimmers only/All.
/cuezeroextract=on –here is on/off possible. This will set „CueZeroExtract“ to on or off.
/releasefirststep=on – here is on/off possible. This will set „Release first step“ to on or off.
/info=“your text“ – this will write „your text“ into the seq info.

2.2 The cue options

You can’t  set the loops via CMD line!
Fade/Delay times:
assign time a at cue x thru y – basic operation, i guess 😉
MIB:
assign cue /mib=late – here is late/early/none possible for the actual cue
assign cue a /mib=early – same options as above. Difference: here the cue
number a will be manipulated.
Triggers:
assign cue /trig=follow – changes the trigger of the actual cue to follow.
Possible Options:
Go/Time/Follow/Sound/BPM/SMPTE/MTC
assign cue a /trig=follow /trigtime=5 – changes the trigger to follow with a trig time of 5
seconds for the cue number a

Cue modes:
assign cue a /mode=x-break – changes the cue mode to x-break. Possible
options:
Normal/assert/x-assert/Release/break/x-break
assign cue a /ae=on – the assert effects will be set to on or off.
Cue Info:
assign cue a /info=”fancy text” – This will write the text „fancy text“ in the info
section of cue a.
CMD Line:
assign cue a /cmd=”off exec 1.2“ – this will create the cmd line entry „off exec 1.2“
CMD Delay:
Store cue x cmddelay y – this will store the cmd delay y in cue x.
Ltime:
assign cue x /ltime=5 – this will set the loop time to 5 seconds
Lcount:
assign cue x /lcount=2 – this will set the loop count to 2 times.

3. The Store options
Store /o – will overwrite the existing content
store /m – will add the new content
store /r – will remove the content
store /rel – will release the content
store /a – will add new cue
store /sm – will add the tracking status to existing content
store /co=true – will prevent changes to track forward
store /co=false – will not prevent changes to track forward
store /e=true – will create an embedded preset
store /e=false – will not create an embedded preset
store /s – will create a selective preset
store /g – will create a global preset
store /u – will create an universal preset
store /pf=false – will switch the presetfilter off
store /pf=true – will switch the presetfilter on
store /source=prog. – will store the programmer values
store /source=output – will store the output values
store /source=DMX In – will store the dmx in values.
store /use=active – will store the active values
store /use=allforselected – will store all values for the selected fixtures/channels
store /use=activeforselected – will store the active values for the selected channels/fixtures
store /use=all – will store all values of all fixtures/channels
store /nc – will surpress the confirmation pop up
store /screen=1 – sets the screen(s) to store
store /x=“a“ – sets the x coordinate to value „a“
store /y=“a“ – sets the y coordinate to value „a“
store /ef=true or =false – will filter by layer, effectlayers will be enabled/disabled
store /vt=true or =false – will filter by layer, valuetimes layer will be enabled/disabled
store /v=true or =false – will filter by layer, value layer will be enabled/disabled
store /ka=false or =true – will keep the values active or not